Introduction

We're now able to pass arbitrary attributes to the vertex shader for each vertex, but what about global variables? We're going to move on to 3D graphics from this chapter on and that requires a model-view-projection matrix. We could include it as vertex data, but that's a waste of memory and it would require us to update the vertex buffer whenever the transformation changes. The transformation could easily change every single frame.

The right way to tackle this in Vulkan is to use resource descriptors. A descriptor is a way for shaders to freely access resources like buffers and images. We're going to set up a buffer that contains the transformation matrices and have the vertex shader access them through a descriptor. Usage of descriptors consists of three parts:

  • Specify a descriptor layout during pipeline creation
  • Allocate a descriptor set from a descriptor pool
  • Bind the descriptor set during rendering

The descriptor layout specifies the types of resources that are going to be accessed by the pipeline, just like a render pass specifies the types of attachments that will be accessed. A descriptor set specifies the actual buffer or image resources that will be bound to the descriptors, just like a framebuffer specifies the actual image views to bind to render pass attachments. The descriptor set is then bound for the drawing commands just like the vertex buffers and framebuffer.

There are many types of descriptors, but in this chapter we'll work with uniform buffer objects (UBO). We'll look at other types of descriptors in future chapters, but the basic process is the same. Let's say we have the data we want the vertex shader to have in a C struct like this:

struct UniformBufferObject {
    glm::mat4 model;
    glm::mat4 view;
    glm::mat4 proj;
};

Then we can copy the data to a VkBuffer and access it through a uniform buffer object descriptor from the vertex shader like this:

layout(binding = 0) uniform UniformBufferObject {
    mat4 model;
    mat4 view;
    mat4 proj;
} ubo;

void main() {
    gl_Position = ubo.proj * ubo.view * ubo.model * vec4(inPosition, 0.0, 1.0);
    fragColor = inColor;
}

We're going to update the model, view and projection matrices every frame to make the rectangle from the previous chapter spin around in 3D.

Vertex shader

Modify the vertex shader to include the uniform buffer object like it was specified above. I will assume that you are familiar with MVP transformations. If you're not, see the resource mentioned in the first chapter.

#version 450

layout(binding = 0) uniform UniformBufferObject {
    mat4 model;
    mat4 view;
    mat4 proj;
} ubo;

layout(location = 0) in vec2 inPosition;
layout(location = 1) in vec3 inColor;

layout(location = 0) out vec3 fragColor;

void main() {
    gl_Position = ubo.proj * ubo.view * ubo.model * vec4(inPosition, 0.0, 1.0);
    fragColor = inColor;
}

Note that the order of the uniform, in and out declarations doesn't matter. The binding directive is similar to the location directive for attributes. We're going to reference this binding in the descriptor layout. The line with gl_Position is changed to use the transformations to compute the final position in clip coordinates. Unlike the 2D triangles, the last component of the clip coordinates may not be 1, which will result in a division when converted to the final normalized device coordinates on the screen. This is used in perspective projection as the perspective division and is essential for making closer objects look larger than objects that are further away.

Descriptor set layout

The next step is to define the UBO on the C++ side and to tell Vulkan about this descriptor in the vertex shader.

struct UniformBufferObject {
    glm::mat4 model;
    glm::mat4 view;
    glm::mat4 proj;
};

We can exactly match the definition in the shader using data types in GLM. The data in the matrices is binary compatible with the way the shader expects it, so we can later just memcpy a UniformBufferObject to a VkBuffer.

We need to provide details about every descriptor binding used in the shaders for pipeline creation, just like we had to do for every vertex attribute and its location index. We'll set up a new function to define all of this information called createDescriptorSetLayout. It should be called right before pipeline creation, because we're going to need it there.

void initVulkan() {
    ...
    createDescriptorSetLayout();
    createGraphicsPipeline();
    ...
}

...

void createDescriptorSetLayout() {

}

Every binding needs to be described through a VkDescriptorSetLayoutBinding struct.

void createDescriptorSetLayout() {
    VkDescriptorSetLayoutBinding uboLayoutBinding{};
    uboLayoutBinding.binding = 0;
    uboLayoutBinding.descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    uboLayoutBinding.descriptorCount = 1;
}

The first two fields specify the binding used in the shader and the type of descriptor, which is a uniform buffer object. It is possible for the shader variable to represent an array of uniform buffer objects, and descriptorCount specifies the number of values in the array. This could be used to specify a transformation for each of the bones in a skeleton for skeletal animation, for example. Our MVP transformation is in a single uniform buffer object, so we're using a descriptorCount of 1.

uboLayoutBinding.stageFlags = VK_SHADER_STAGE_VERTEX_BIT;

We also need to specify in which shader stages the descriptor is going to be referenced. The stageFlags field can be a combination of VkShaderStageFlagBits values or the value VK_SHADER_STAGE_ALL_GRAPHICS. In our case, we're only referencing the descriptor from the vertex shader.

uboLayoutBinding.pImmutableSamplers = nullptr; // Optional

The pImmutableSamplers field is only relevant for image sampling related descriptors, which we'll look at later. You can leave this to its default value.

All of the descriptor bindings are combined into a single VkDescriptorSetLayout object. Define a new class member above pipelineLayout:

VkDescriptorSetLayout descriptorSetLayout;
VkPipelineLayout pipelineLayout;

We can then create it using vkCreateDescriptorSetLayout. This function accepts a simple VkDescriptorSetLayoutCreateInfo with the array of bindings:

VkDescriptorSetLayoutCreateInfo layoutInfo{};
layoutInfo.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
layoutInfo.bindingCount = 1;
layoutInfo.pBindings = &uboLayoutBinding;

if (vkCreateDescriptorSetLayout(device, &layoutInfo, nullptr, &descriptorSetLayout) != VK_SUCCESS) {
    throw std::runtime_error("failed to create descriptor set layout!");
}

We need to specify the descriptor set layout during pipeline creation to tell Vulkan which descriptors the shaders will be using. Descriptor set layouts are specified in the pipeline layout object. Modify the VkPipelineLayoutCreateInfo to reference the layout object:

VkPipelineLayoutCreateInfo pipelineLayoutInfo{};
pipelineLayoutInfo.sType = VK_STRUCTURE_TYPE_PIPELINE_LAYOUT_CREATE_INFO;
pipelineLayoutInfo.setLayoutCount = 1;
pipelineLayoutInfo.pSetLayouts = &descriptorSetLayout;

You may be wondering why it's possible to specify multiple descriptor set layouts here, because a single one already includes all of the bindings. We'll get back to that in the next chapter, where we'll look into descriptor pools and descriptor sets.

The descriptor layout should stick around while we may create new graphics pipelines i.e. until the program ends:

void cleanup() {
    cleanupSwapChain();

    vkDestroyDescriptorSetLayout(device, descriptorSetLayout, nullptr);

    ...
}

Uniform buffer

In the next chapter we'll specify the buffer that contains the UBO data for the shader, but we need to create this buffer first. We're going to copy new data to the uniform buffer every frame, so it doesn't really make any sense to have a staging buffer. It would just add extra overhead in this case and likely degrade performance instead of improving it.

We should have multiple buffers, because multiple frames may be in flight at the same time and we don't want to update the buffer in preparation of the next frame while a previous one is still reading from it! Thus, we need to have as many uniform buffers as we have frames in flight, and write to a uniform buffer that is not currently being read by the GPU

To that end, add new class members for uniformBuffers, and uniformBuffersMemory:

VkBuffer indexBuffer;
VkDeviceMemory indexBufferMemory;

std::vector<VkBuffer> uniformBuffers;
std::vector<VkDeviceMemory> uniformBuffersMemory;
std::vector<void*> uniformBuffersMapped;

Similarly, create a new function createUniformBuffers that is called after createIndexBuffer and allocates the buffers:

void initVulkan() {
    ...
    createVertexBuffer();
    createIndexBuffer();
    createUniformBuffers();
    ...
}

...

void createUniformBuffers() {
    VkDeviceSize bufferSize = sizeof(UniformBufferObject);

    uniformBuffers.resize(MAX_FRAMES_IN_FLIGHT);
    uniformBuffersMemory.resize(MAX_FRAMES_IN_FLIGHT);
    uniformBuffersMapped.resize(MAX_FRAMES_IN_FLIGHT);

    for (size_t i = 0; i < MAX_FRAMES_IN_FLIGHT; i++) {
        createBuffer(bufferSize, VK_BUFFER_USAGE_UNIFORM_BUFFER_BIT, VK_MEMORY_PROPERTY_HOST_VISIBLE_BIT | VK_MEMORY_PROPERTY_HOST_COHERENT_BIT, uniformBuffers[i], uniformBuffersMemory[i]);

        vkMapMemory(device, uniformBuffersMemory[i], 0, bufferSize, 0, &uniformBuffersMapped[i]);
    }
}

We map the buffer right after creation using vkMapMemory to get a pointer to which we can write the data later on. The buffer stays mapped to this pointer for the application's whole lifetime. This technique is called "persistent mapping" and works on all Vulkan implementations. Not having to map the buffer every time we need to update it increases performances, as mapping is not free.

The uniform data will be used for all draw calls, so the buffer containing it should only be destroyed when we stop rendering.

void cleanup() {
    ...

    for (size_t i = 0; i < MAX_FRAMES_IN_FLIGHT; i++) {
        vkDestroyBuffer(device, uniformBuffers[i], nullptr);
        vkFreeMemory(device, uniformBuffersMemory[i], nullptr);
    }

    vkDestroyDescriptorSetLayout(device, descriptorSetLayout, nullptr);

    ...

}

Updating uniform data

Create a new function updateUniformBuffer and add a call to it from the drawFrame function before submitting the next frame:

void drawFrame() {
    ...

    updateUniformBuffer(currentFrame);

    ...

    VkSubmitInfo submitInfo{};
    submitInfo.sType = VK_STRUCTURE_TYPE_SUBMIT_INFO;

    ...
}

...

void updateUniformBuffer(uint32_t currentImage) {

}

This function will generate a new transformation every frame to make the geometry spin around. We need to include two new headers to implement this functionality:

#define GLM_FORCE_RADIANS
#include <glm/glm.hpp>
#include <glm/gtc/matrix_transform.hpp>

#include <chrono>

The glm/gtc/matrix_transform.hpp header exposes functions that can be used to generate model transformations like glm::rotate, view transformations like glm::lookAt and projection transformations like glm::perspective. The GLM_FORCE_RADIANS definition is necessary to make sure that functions like glm::rotate use radians as arguments, to avoid any possible confusion.

The chrono standard library header exposes functions to do precise timekeeping. We'll use this to make sure that the geometry rotates 90 degrees per second regardless of frame rate.

void updateUniformBuffer(uint32_t currentImage) {
    static auto startTime = std::chrono::high_resolution_clock::now();

    auto currentTime = std::chrono::high_resolution_clock::now();
    float time = std::chrono::duration<float, std::chrono::seconds::period>(currentTime - startTime).count();
}

The updateUniformBuffer function will start out with some logic to calculate the time in seconds since rendering has started with floating point accuracy.

We will now define the model, view and projection transformations in the uniform buffer object. The model rotation will be a simple rotation around the Z-axis using the time variable:

UniformBufferObject ubo{};
ubo.model = glm::rotate(glm::mat4(1.0f), time * glm::radians(90.0f), glm::vec3(0.0f, 0.0f, 1.0f));

The glm::rotate function takes an existing transformation, rotation angle and rotation axis as parameters. The glm::mat4(1.0f) constructor returns an identity matrix. Using a rotation angle of time * glm::radians(90.0f) accomplishes the purpose of rotation 90 degrees per second.

ubo.view = glm::lookAt(glm::vec3(2.0f, 2.0f, 2.0f), glm::vec3(0.0f, 0.0f, 0.0f), glm::vec3(0.0f, 0.0f, 1.0f));

For the view transformation I've decided to look at the geometry from above at a 45 degree angle. The glm::lookAt function takes the eye position, center position and up axis as parameters.

ubo.proj = glm::perspective(glm::radians(45.0f), swapChainExtent.width / (float) swapChainExtent.height, 0.1f, 10.0f);

I've chosen to use a perspective projection with a 45 degree vertical field-of-view. The other parameters are the aspect ratio, near and far view planes. It is important to use the current swap chain extent to calculate the aspect ratio to take into account the new width and height of the window after a resize.

ubo.proj[1][1] *= -1;

GLM was originally designed for OpenGL, where the Y coordinate of the clip coordinates is inverted. The easiest way to compensate for that is to flip the sign on the scaling factor of the Y axis in the projection matrix. If you don't do this, then the image will be rendered upside down.

All of the transformations are defined now, so we can copy the data in the uniform buffer object to the current uniform buffer. This happens in exactly the same way as we did for vertex buffers, except without a staging buffer. As noted earlier, we only map the uniform buffer once, so we can directly write to it without having to map again:

memcpy(uniformBuffersMapped[currentImage], &ubo, sizeof(ubo));

Using a UBO this way is not the most efficient way to pass frequently changing values to the shader. A more efficient way to pass a small buffer of data to shaders are push constants. We may look at these in a future chapter.

In the next chapter we'll look at descriptor sets, which will actually bind the VkBuffers to the uniform buffer descriptors so that the shader can access this transformation data.

C++ code / Vertex shader / Fragment shader